How to resolve Epson Printer L110 Paper Jam Issue
One of the most common reasons for occurring Epson L110 paper jam issue is the presence of tiny pieces of paper inside the printer or other parts of the printer. If you find your Epson printer in error state showing code L110, you can assume the reason to be due to few papers or the paper feed section got broken.
There can be several reasons for this error issue; we will look through it further in this article. The Epson printer support team said that you need to do a periodic check as the paper feed sensors inside the printer might cause the paper jam issue. It would be best to read this article further to know the proper solutions for such matters.
The reason behind Epson L110 keeps saying paper jam.
It is rare, but sometimes even without any issues, the Epson printer shows paper jams and doesn't print, but you'll find thatno paper jam might leave you confused in reality.
In most cases, the paper jam issue in the Epson printer occurs due to a jammed or a dirty sensor flag in the printer. To be sure about it, you need to look inside the Epson printer through the paper path to find any stuck sensor arm. You’ll find that mainly in every printer, the paper sensor flag is located near the paper feeds and in the path where the paper needs to come out of the printer. You must check that the documents go smoothly through these sensors whilemoving through their course. The paper sheet will get blocked from moving their desired path even if a small piece of paper or pin or some other material gets stuck inside the Epson printer. This problem is the reason why the false paper jam is shown.Necessary steps to fix the Epson L110 Paper Jam Issue
If you are looking for solutions to fix the problem at home rather than calling an expert, then you are at the right place. We will be providing the best solutions to improve the Epson printer L110 paper jam issue. You need to follow each step carefully as any wrong action could negatively affect your printer.
Check PW Sensor: Those who are not aware of where the PW sensor is located then, can found it at the base area of the printhead carriage, which you might discover brimming with paper dust and dry with ink. You need to uninstall the whole part first before you start cleaning it. Later on, it would be best if you dried the gadget.
Check PE Sensor: You need to check the PE sensor completely to wipe it out properly. Check CR Encoder Sensor: For this, you need to check the CR encoder for the strip, and later you need to clean it on, which might be grimy enough to work on. Check PF Encode Sensor: You need to check the PF encode and the CR encoder, and whenever you find it filthy to use, you need to clear it out. Check PG Sensor: Lastly, you need to look at the PG sensor and clean everything through the gadget. Other solutions: The first step is to unplug your Epson printer and wait for few minutes before restarting your printer. Also, it would be best if you made sure not to pull out any paper while the printer us in a jam situation in the opposite direction, leading to more complications. After following the earlier steps, you have to ensure no loose paper stuck in the loading tray. The last but not minor step is to clean the printer roller properly with a soft cloth. Finally, you need to restart your computer after completing the process and start your printer.Conclusion
Now that you have read the whole article, you can find why the Epson printer L110 paper jam issue easily and using the solutions given above in the article, and you can quickly solve it. I hope you've found the exact thing you were looking for in this article but be careful while following the steps to fix the issue as not following the steps could affect your Epson printer.