IPv6 Training (Cisco) - What is NAT-PT?
I know all of you die hard IPv6 enthusiasts already know what the acronym NAT-PT stands for, so this article is for the IPv6 new comers.
NAT-PT stands for "Network Address Translation - Protocol Translation" it is an IPv6-IPv4 translation mechanism, which was designed (created) to allow IPv6-only devices communicate with IPv4-only devices and vice versa.
Cisco's basic operation of the NAT-PT consists of three items:
The IPv6 only device (node) that is located on a IPv6 only network
The IPv4 only device (node) that is located on a IPv4 only network
And, the Cisco NAT-PT router that is located in between both network only devices and is doing the protocol translating.
NAT-PT is mainly used by organizations (companies) as a short-term fix; until they are completely ready to migrate to IPv6.
The best advantage of using Cisco's version of NAT-PT is that only the Cisco NAT-PT router needs to configured; the IPv4 and IPv6 network only devices involved are totally clueless that NAT-PT is happening between them. Cisco recommends that you never allow a Cisco NAT-PT router perform NAT-PT between Dual Stack devices.
The major downfall of using Cisco's version of NAT-PT is that you have a single point of failure, the Cisco NAT-PT router itself. This is why Cisco recommends that the NAT-PT solution only be used for a short amount of time, until a long term solution can be achieved.
Currently, Cisco NAT-PT can be implemented in four ways:
Static NAT-PT
Dynamic NAT-PT
Port Address Translation (PAT) a.k.a. Overload
IPv4-Mapped Operation
I invite you to visit my website were you'll find the latest information regarding Cisco IPv6 Design and Implementation Techniques.
To your success,
Charles Ross, CCNP #CSCO10444244 is the owner of Ittechtips.com; where you'll find free comprehensive information and videos about IPv6 technology and how it works with Cisco Systems technology.
Sign-Up for "18 Free Videos" that will teach you IPv6 Address Representation In Under 10 Minutes! And, also learn more about the new "Cisco IPv6 Video Accelerated Training Course" at his website.
I know all of you die hard IPv6 enthusiasts already know what the acronym NAT-PT stands for, so this article is for the IPv6 new comers.
NAT-PT stands for "Network Address Translation - Protocol Translation" it is an IPv6-IPv4 translation mechanism, which was designed (created) to allow IPv6-only devices communicate with IPv4-only devices and vice versa.
Cisco's basic operation of the NAT-PT consists of three items:
https://exedprograms.kellogg.northwestern.edu/eportfolios/1333/Home/Real_H12425_Exam https://exedprograms.kellogg.northwestern.edu/eportfolios/1333/Home/Real_H13311_V30_Exam https://exedprograms.kellogg.northwestern.edu/eportfolios/1334/Home/Ideal_H13321_Exam https://exedprograms.kellogg.northwestern.edu/eportfolios/1334/Home/Ideal_H13527_Exam https://exedprograms.kellogg.northwestern.edu/eportfolios/1334/Home/Advanced_H13611_Exam
The IPv6 only device (node) that is located on a IPv6 only network
The IPv4 only device (node) that is located on a IPv4 only network
And, the Cisco NAT-PT router that is located in between both network only devices and is doing the protocol translating.
NAT-PT is mainly used by organizations (companies) as a short-term fix; until they are completely ready to migrate to IPv6.
The best advantage of using Cisco's version of NAT-PT is that only the Cisco NAT-PT router needs to configured; the IPv4 and IPv6 network only devices involved are totally clueless that NAT-PT is happening between them. Cisco recommends that you never allow a Cisco NAT-PT router perform NAT-PT between Dual Stack devices.
The major downfall of using Cisco's version of NAT-PT is that you have a single point of failure, the Cisco NAT-PT router itself. This is why Cisco recommends that the NAT-PT solution only be used for a short amount of time, until a long term solution can be achieved.
Currently, Cisco NAT-PT can be implemented in four ways:
Static NAT-PT
Dynamic NAT-PT
Port Address Translation (PAT) a.k.a. Overload
IPv4-Mapped Operation
I invite you to visit my website were you'll find the latest information regarding Cisco IPv6 Design and Implementation Techniques.
To your success,
Charles Ross, CCNP #CSCO10444244 is the owner of Ittechtips.com; where you'll find free comprehensive information and videos about IPv6 technology and how it works with Cisco Systems technology.
Sign-Up for "18 Free Videos" that will teach you IPv6 Address Representation In Under 10 Minutes! And, also learn more about the new "Cisco IPv6 Video Accelerated Training Course" at his website.
I know all of you die hard IPv6 enthusiasts already know what the acronym NAT-PT stands for, so this article is for the IPv6 new comers.
NAT-PT stands for "Network Address Translation - Protocol Translation" it is an IPv6-IPv4 translation mechanism, which was designed (created) to allow IPv6-only devices communicate with IPv4-only devices and vice versa.
Cisco's basic operation of the NAT-PT consists of three items:
The IPv6 only device (node) that is located on a IPv6 only network
The IPv4 only device (node) that is located on a IPv4 only network
And, the Cisco NAT-PT router that is located in between both network only devices and is doing the protocol translating.
NAT-PT is mainly used by organizations (companies) as a short-term fix; until they are completely ready to migrate to IPv6.
The best advantage of using Cisco's version of NAT-PT is that only the Cisco NAT-PT router needs to configured; the IPv4 and IPv6 network only devices involved are totally clueless that NAT-PT is happening between them. Cisco recommends that you never allow a Cisco NAT-PT router perform NAT-PT between Dual Stack devices.
The major downfall of using Cisco's version of NAT-PT is that you have a single point of failure, the Cisco NAT-PT router itself. This is why Cisco recommends that the NAT-PT solution only be used for a short amount of time, until a long term solution can be achieved.
Currently, Cisco NAT-PT can be implemented in four ways:
Static NAT-PT
Dynamic NAT-PT
Port Address Translation (PAT) a.k.a. Overload
IPv4-Mapped Operation
I invite you to visit my website were you'll find the latest information regarding Cisco IPv6 Design and Implementation Techniques.
To your success,
Charles Ross, CCNP #CSCO10444244 is the owner of Ittechtips.com; where you'll find free comprehensive information and videos about IPv6 technology and how it works with Cisco Systems technology.
Sign-Up for "18 Free Videos" that will teach you IPv6 Address Representation In Under 10 Minutes! And, also learn more about the new "Cisco IPv6 Video Accelerated Training Course" at his website.